Posts Tagged 'virago'

Projects

Finally got everything from SF. Now to get organized and get busy!
IMG_1090

IMG_1091

IMG_1092

IMG_1093

IMG_1094

IMG_1096

IMG_1097

IMG_1098

This isn’t all of them, there’s still the Motobecane VLX, Critical Miss, HobBAD Sparkle Butt, Ciao Ciao and the other DR350. But now everything’s more or less in one place and I’ve got my tools. I’m stoked!

Advertisements

dirtbag virago

i’m mostly posting about this bike because i don’t have anything else i’m quite ready to post about just yet, plus it should be in here somewhere.
this is a bike that i built for the dirtbag challenge in 011, but didn’t quite finish in time. poll, the guy that puts on the dirtbag every year, told me to finish it and use it in 012, so that’s what i did! kinda.

here it is when i got my hands on it. 1984 yamaha virago xv700. hadn’t been ran in a year or more. abandoned at the shop, my boss sold it to me for $200, i think.
1

i stripped it down and put most of the bits on ebay. i think i made back $175 in selling parts. i lowered the front by flipping the top triple tree, this allowed me to drop the front a good 3″ or so without pushing the fork sanctions up through the triple, which would interfere with the bars. i used the stock handle bar risers and threw some moped clubman bars on it and was stoked.
198734_10150728945085244_4015497_n

i cut the rear subframe off and engineered a rigid rear end that would allow for the swing arm to drop so that the rear wheel could still be removed. because the bike is shaft drive, it took a little critical thinking.
198632_10150739028925244_8250279_n

got a honda tank off ebay, hammered the tunnel a bit so it would fit over the frame, found an angle i liked and welded in some moped fender brackets to hold the tank there. that left a bunch of room in the tank tunnel, so that’s where most of the electrical lives. the seat almost had padding!
308927_10150770842360244_720823_n

modified a moped headlight bucket to bolt up to the forks, threw on a cheapo quick pull throttle, fashioned an intake out of some pvc and a k&n filter, made a seat pan out of some metal shelving, bolted on an autozone trailer tail light threw together a wiring harness, zip tied in a scooter battery and called it good.

here’s jamie lookin like a little bad ass on it-
381861_10152227918060244_634394998_n

a useless mirror to try and make it a little more “legal”
IMG_20121111_005415

the bike and i made the 012 dirtbag challenge, but i got about 80 miles through the 100 mile ride my battery crapped out on me. here’s the bike where it left me stranded for about 3 hours in the woods with no reception while i waited on rescue.
IMG_20121111_165852

i was eventually able to get a hold of justin, and just as he was picking me up, a truck rolled by with another dirtbag bike in the back and they took the bike back to the party for me.

it’s such a fun ride. 15 year old tires, no fork oil (most of it has leaked onto the front brake and tire), no foot pegs (feet go on the engine cases), no padding for your butt and having to push start the bike makes it an interesting ride, but surprisingly not all that uncomfortable! and it’s so much fun to rip around on. it’s pretty fast for an early 80’s 700cc cruiser!

i know these photos are horrible, as are most in this blog. i’m working on getting a good camera, when that happens i’ll pull the virago down and take some quality photos.


enter your email address to follow this blog and receive notifications of new posts by email.

Join 121 other followers

  • 19,968 yous guys